| steel | type | purposes | 1Cr18Ni9Ti | austenitic | the most widely used, applies to the food, chemical, medicine, atomic energy industry. | 0Cr25Ni20 | austenitic | furnace materials, automobile exhaust purification device materials. | 1Cr18Ni9 | austenitic | high strength by cold working, building decoration parts. | 0Cr18Ni9 | austenitic | used as a heat-resistant stainless steel the most widely used food equipment, general chemical equipment, nuclear power industries. | 00Cr19Ni10 | austenitic | for wild open-air machines require high resistance to intergranular corrosion chemical, coal, petroleum industry, building materials, heat-resistant parts and heat treatment have difficulty parts. | 0Cr17Ni12Mo2 | austenitic | in seawater and other media, mainly for the resistance to pitting corrosion materials, photographic food industry, coastal facilities, rope, CD rod, bolts, nuts . | 00Cr17Ni14Mo2 | austenitic | 0Cr17Ni12Mo2 of ultra-low carbon steel, used against intergranular corrosion products have special requirements. | 1Cr18Ni12Mo2Ti | austenitic | for resistance to sulfuric acid, phosphoric acid, formic acid, acetic acid equipment, good resistance to intergranular corrosion. | 0Cr18Ni12Mo2Ti | austenitic | ibid. | 0Cr18Ni10Ti | austenitic | Ti to increase resistance to intergranular corrosion, and is not recommended for the installed components. | 0Cr16Ni14 | austenitic | non-magnetic stainless steel for electronics components. | 0-1Cr20Ni14Si2 | austenitic | has a high temperature strength and oxidation resistance, and more sensitive to sulfur atmosphere, precipitation phase embrittlement tendency in 600-800 ℃, for the production of various furnace components under stress. | 1Cr17Ni7 | austenitic | for high-strength components, materials used in the train carriage. | 00Cr18Ni5Mo3Si2 | austenite + ferrite | resistance to stress corrosion breakdown of good performance, with high strength, applies to the environment of the chlorine ions, for the frozen oil, fertilizer, paper, petroleum, chemical industry, manufacture of heat exchangers, condensers, and so on. | 0Cr17 (Ti) | the Ferritic | barrel impact pressure washer, decorative. | 00Cr12Ti | the Ferritic | for car muffler pipe decorations. | 0Cr13Al | the Ferritic | cooling from high temperatures does not produce a significant hardening of turbine materials, quenching of components, composite steel. | 1Cr17 | the Ferritic | corrosion resistance Good general steel building, decorative, heavy oil burner parts for household appliances, household appliances parts. | 0Cr13 | the Ferritic | for higher toughness and impact load of parts, such as steam turbine blades, structural frame, bolts, nuts. | 1Cr13 | martensitic | has good corrosion resistance, machinability, and as a general purpose blade machine parts, oil refining equipment, bolts, nuts, pump rod, and silverware. | 2Cr13 | martensitic | quenching state, high hardness, good corrosion resistance for turbine blades, cutlery (knives). |